Probably every angler had situations in which broken equipment or pierced inflatable boat not only negatively affected the efficiency of fishing, but perhaps completely prevented the continuation of fishing. The are many reasons for this type of damage: sharp stone in the water or on the shore, rodents in the garage or simply carelessness, as well as hundreds of other factors, more or less rational.
Certainly most people in this case are thinking about putting the equipment into the hands of professionals, where the repair process is quite simple but time-consuming: the inflatable boat is completely dismantled, sealed from the inside and reassembled. Due to time and money, customers often look for alternative solutions that they could deal with themselves. Nowadays in the stores we find a lot of universal products, which in fact turn out to be ineffective or can even cause damage. It happens because an effective product should be designed specifically for a given type of material, so it shouldn’t be a universal or adapted product for different types of material. Each structure is characterized by a different chemical composition with different binding properties.
Curiosity – in 80% of cases, sailing on an inflatable boat ends with its noticeable or invisible damages.
Why are we discussing so obvious issues to anglers? An innovative product appeared on the european market, the quality of which facilitates and significantly speeds up the process of repairing a wide range of PVC, vinyl and other materials, which are often used to produce among others inflatable boats. Ulow Liquid PVC – is substance designed by Ukrainian specialists. Our product is created for people who don’t want to waste money on expensive repair in a professional salon and at the same time want to maintain the highest quality of their equipment.
From now repairing the inflatable boat with following a few rules, will become today’s child’s play.The main advantage of the repair is that unlike regular glue, Ulow Liquid PVC doesn’t glue two surfaces. It creates a new coating, which through a high level of adhesion, completely reproduces the material.
After applying the Ulow Liquid PVC on surface a chemical reaction takes place, during which one part of the components melts the material, and the other part forms a flexible plastic layer of polymers on it. Then, the upper layer of material and Liquid PVC bond together for good, so that the patched space is not only hermetic, but also more resistant to subsequent potential damage, compared with not patched area around.
Attention! Ulow Liquid PVC will not repair a rubber inflatable boat, because this material has a completely different structure so proper repair requires a different method. The same applies to inflatable boats from expensive and permanent hypalon, which is also a material not recommended for our product.